One of my daughter's friends just had her baby & my daughter asked me if I would make her a card. The blue card stock is from a pack of primary colored card stock I got at Walmart. I don't remember the name of the patterned paper & I'm not at my desk right now so I'll update soon. My apologies. I cut three layers of the onesie. Of the three layers 2 were cut from cereal box material & the third was of the patterned paper. I first used Scotch Quick Drying adhesive to bond the two cardboard pieced together then, using the same adhesive, I bonded the patterned paper to the cardboard shapes. The shadow layer, the orange card stock is from a pack of cardstock I had picked up from Walmart. It's a pack of all bold colors.I used foam squares to adhere the patterned onesie to the orange shadow layer to lift it up off the paper to give it some dimension. The round embellishment on the front of the card was made using the i-Top tool & accessories made to go along with it. I chose the section of the designer paper I wanted to use, cut it out using the stencil for the size I wanted to make, then followed the i-Top tool directions. I then pierced the paper with my Tim Holtz paper piercing tool, pushed the prongs through the paper, separated the prongs to each side until brad was firmly secured to the paper. Once I had all items on the patterned paper mat I secured it to the card base using my scotch tape runner gone with permanent adhesive.
Hi, welcome to my little part of the world. Thank you for taking the time to visit me. This is where I like to share some of the goodies I've made. You'll also find links to some very wonderful, talented, & generous people here as well.
Friday, April 6, 2012
Tuesday, April 3, 2012
This was a wedding card I made for one of my husband's coworkers. All paper/card stock used for this card is Georgia Pacific white card stock. The accent layer was embossed using the Provo Craft "Textile" embossing folder and running it through my Cuttlebug. The bells/ribbon were cut on my Cricut Expression. I used 1 layer of white card stock and 2 layers of cereal box material. The bells/ribbon were heat embossed using my Versamark Embossing pad & StampinUp's Iridescent Ice embossing powder. They then were affixed to each other with permanent snail adhesive. Pop dots were placed on the back to lift if up off the card front for dimension. I took some white ribbon and stamped my congratulations sentiment on it with Brilliance "Graphite Black" Archival pigment ink. I'm sorry I've not stated what type of ribbon it was that I used, but there is no marking on the spool stating any info. I truly wish the camera could have captured the shimmer & sparkle of the embossing powder. It is absolutely beautiful!! The recipients loved it which of course was my ultimate goal so mission accomplished :)
Labels:
card,
Cricut,
cuttlebug,
embossing powder,
Iridescent Ice,
StanmpinUp,
wedding
Rock Out
This is another card I made for my son during his deployment in Afghanistan. He loves music and is very good at playing music of all kinds. He was even requested to play the National Anthem to open the AIT graduation ceremony at Fort Leonard Wood, MO in 2009. He's left handed, taught himself to play a right handed guitar, and plays by ear. Although it may sound easy for a "lefty" to play a right handed guitar, it really isn't. Just for example, the guitar is turned upside down and facing the opposite direction so all strings are backwards. Anyway, while he was deployed my husband and I shipped his electric guitar and amp over to him. He was so excited when he received it! :) His music is a huge means of keeping himself "grounded" & his head "clear" so we were more than excited to send it to him.
Ok, the base of the card is Georgia Pacific white card stock. All other card stock is from the ROCKSTAR pack by DCWV (Die Cuts With A View). I used my white Gelly Roll medium point gel pen to create the "stitch" lines around the round embellishment of which has pop dots underneath to lift it off the card and create dimension. The copper brads are a product of Making Memories.
Ok, the base of the card is Georgia Pacific white card stock. All other card stock is from the ROCKSTAR pack by DCWV (Die Cuts With A View). I used my white Gelly Roll medium point gel pen to create the "stitch" lines around the round embellishment of which has pop dots underneath to lift it off the card and create dimension. The copper brads are a product of Making Memories.
Labels:
card,
DCWV,
gelly roll pen,
guitar,
making memories,
rock,
rock and roll,
white
Saturday, March 24, 2012
New Glass Piece For New Parents
This glass piece was made for one of my husband's coworkers. He and his wife had just had their first baby and God blessed them with a precious little girl. The ribbon is by Ofray. I cut all my stencils using repositionable contact paper from Walmart & cut it using my Cricut. Once I had my stencils where I wanted them on the glass I used Armour Etch to etch the designs into the glass.
Jazzy Birthday Card
Here's the birthday card I made for my youngest granddaughter this year. She's growing so fast and just as beautiful as can be!! I hope she enjoyed her goodie box and card :) She lives about 800 miles away so I wasn't able to be there : ( The card stock I used for the card is a purple shimmer. Walmart sold it in a pack of different colors for awhile, but I've not seen it there lately. That's sad because it had such vibrant colors in it and the shimmer was so nice! It cut very clean too. The ribbon is by Ofray. The happy birthday image was a free image I found online. I printed it on card stock, placed pop dots on the pack and positioned it on the die cut I made. It was made using my Spellbinder's Nestabilities from the Label Two set. I distressed the edges of it with Tim Holtz's Dusty Concord Distress Ink. The die cut is made from a material I have no name for. My husband brought it home to me. My biggest fan and enabler!! :)
Friday, March 23, 2012
Birthday "Goodie Box"!
First Mini Album
Hi all! This is a mini album I made. It was such fun making it!! I
left the front center blank so the recipient could place whatever photo they
wanted there. I used my Cinch to bind it using either Blueberry or Ocean
spiral binding(sorry I can't remember exactly which one it was). The paper collection I used was Heidi Grace Prlscent. I'm going to venture and guess that's supposed to be short for Pearlescent. I put a couple of Tim Holtz corner protectors on it. I
just love his product line! The photo frame I have hanging from the binding at
the top was made using Making Memories Glass & Frame. The large flower in the upper right is a Making Memories Jumbo Blossom with Pebble Brad. The
center is a piece of cereal box cut on my Cricut using a top note svg file which had stitching
cut outs around the outside edge. I then cut a piece of blue card stock using the same file. I distressed the edges using Tim Holtz Vintage Photo distress ink. Then I weaved yellow & burgundy ribbon, alternating colors, every other stitch. The Bible charm is a locket of which I
placed a couple of photos in that I know the recipient doesn't have :) I
loved the vintage look chain. It has multiple keys and padlocks attached to it.
I used my Slice Elite machine to cut a tag of which I heat embossed the design
on it then placed it in a Making Memories tag frame. I tied different types of
ribbons to the binding as well. The pink flower is a white Spare Parts flower I
spritzed with Viva Pink Tattered Angels Glimmer Mist then used a yellow mini
brad in the center. Each flower has a butterfly on it. The butterfly on the
white flower is a shimmery foil material. For the life of me, I can't remember
who made them. They came with many on one sheet with multiple shapes & sizes. The butterfly on
the other flower is a purple crystal. The brass plate in the bottom right
corner says I Love You. I just happen to find this in an old jewelry box among
a lot of old jewelry I'd forgotten we had. And I used a Teresa Collins Perfect Closure Leather Strap. I just love the look her closure gives to it. If I've missed something or you have any questions please feel free to contact me.
Labels:
album,
bible,
brass,
cereal,
chip board,
cornerprotectors,
Cricut,
cuttlebug,
flowers,
gift,
leather,
locket,
love,
makingmemories,
photoframe,
ribbon,
tag,
teresacollins,
tim holtz
Sunday, March 14, 2010
Miss Talking To You Card
Butterfly Friendship Easel Card
Hi again, it certainly doesn't seem like the entire week has gone by already. Here is a card I created. It's design is called an "easel" card. I watched a tutorial on YouTube.com. which is a great source for many different tutorials. Unfortunately it has been removed by the user. It was very informative and basic for the beginner (like me) yet very attractive. However, I just used the basic idea and altered the card using my own idea. Still basic, but it was received very well :) It's always nice to be able to bring a smile to someone's face :) Anyway, here is my version.
Sunday, March 7, 2010
Thinking of You
Hi all, this is a card I made this evening. I'm sorry I don't know the company the paper is from, but the name of the pattern is Poppy Plaid Printed Flat Paper. The base is a half sheet of plain white card stock cut in half long ways then folded in half which would make it 5.50 x 4.25. The patterned paper that was previously mentioned is cut at 5.25" x 4". The girl with her flowers was a image I printed from a card creation software on my computer then colored in with glitter pens I bought at Walmart in the scrapbooking section. I then cut the corners off with a corner punch. The ribbon is from Portafolia Gifted Memories Scrapbooking Ribbons, however there is no style name on the spool of the ribbon. I used EK Success 3D Dots on the back of the little girl to lift her off the card for a 3D effect. The "Thinking of You" sentiment is a Kolette Hall design which was designed for Studio G. It was inked and stamped in Colorbok Earthy Ores Black. I personally wish I'd have paid more attention to the lettering on the stamp as I had hoped for a bolder print, but, as usual, I live and learn. At any rate, I do like this card & I hope the recipient does also. Oh, I almost forgot, the edges of the little girl were inked in Colorbok Earthy Ores Brown. I wanted a little something to bring out the yellow, orange, & pink flowers so they wouldn't get "lost" among the blues and purples. Just a little something to "break it" just a bit. Be blessed!
Saturday, March 6, 2010
Rock Star card
Thursday, March 4, 2010
Flowery Thank You Card
Hi, here is a card that I created using my Cricut Expression and the Plantin Schoolbook cartridge. The card all items are made from card stock I bought at Walmart. If you are in the market for a cutting machine and considering buying a Cricut.....think long and hard first. There are many machines on the market comparably priced that do much more than the Cricut is able to do and the company who makes the Cricut has made it very clear they have no intention of offering these new options to their customers.
My Creative Corner
Lil' Miss Brailey's Bag
Here is a cute little bag I made using my Cricut Expression for a friend's new grand-daughter. I used the Plantin Schoolbook & Home Accents cartridges for my greeting. I used SCAL to make my flower and some *bling* I have for the center of the flower.
Labels:
cartridge,
craft,
Cricut,
Expression,
flower,
SCAL,
surecutsalot
Dragonfly Glitz
Hey there, I made this card as soon as I got my new dragonfly stamp and heat embossing powders! I just love this card and it was so much fun to make! :) The photo does not do it justice. The dragonfly has such a beautiful shimmer to it.
Party Favor Bag
Hi, here is a party favor bag I cut with my Cricut Expression and added some shimmery prism curling ribbon. This is such an easy item to make as it's all one piece. Just cut, fold, & decorate. Love it! The card stock is from the Martha Stewart pack for baby boys & the iridescent ribbon I got at Hobby Lobby.
Labels:
bag,
Cricut,
easy,
Expression,
favor,
HobbyLobby,
irridescent,
MarthaStewart,
party,
ribbon
It's A Girl card
Here's another baby card I had a lot of fun creating. In this process I embraced the use of wall paper, my Crop-A-Dile II Big Bite, lavender eyelets, shimmery prism curling ribbon. Using beautiful pink glitter card stock I cut my sentiment with my Cricut Expression. I mounted the sentiment on the wallpaper, punched holes in the wallpaper, run the ribbon through the holes, tied & curled it, then attached the wallpaper & ribbon with the eyelets on some green glitter paper from the same pack as the pink which I bought at Walmart.
Labels:
Cricut,
Crop A Dile II Big Bite,
glitter,
ribbon,
wall paper
Cuttlebug Baby Card
Baby cards are so much fun!! I used pastel pink & white card stock that I'd gotten from Walmart. I put my white card stock in my Baby embossing folder by Cricut & run it through my Cuttlebug embossing machine. Once it was embossed I colored it using my Decorating Chalks by Craf-T and Pearlescent Chalks by Pebbles Inc in creating it.
Labels:
card stock,
chalk,
Craf-T,
Cricut,
cuttlebug,
embossing,
folder,
Pebbles Inc,
pink,
white
3D Thank You
Hi all, here is a thank you card I created. I discovered a new technique called heat embossing to use for my cards & other creations. I found out about this technique one day while checking out the many wonderful crafting tutorials on YouTube.com! I am so hooked on this technique! It is so simple yet so pretty! Oh! If you will notice along the way, you will see that I have really taken a liking to different types of glue dots called Pop Dots or Dimensionals. These wonderful items raise items up off the paper and give them something of a 3D effect.
Labels:
3D,
card,
craft,
dimensionals,
heat embossing,
popdots
Father's Day card using Wild Card cartridge
Subscribe to:
Posts (Atom)





















